|
UNIQUE
PRODUCT COVERING ALL CLASS OF FIRES DEVELOPED FOR THE FIRST TIME IN
INDIA, FULFILLING LONG AWAITED NEED.
| Approval
: |
Officially
approved by Bureau of
Indian Standards for use on fires of class B and C. 14609.
Also Tested on metal fire classd by MOD D
Approved by Tariff Advisory Committee (TAC) Tested by DIFR New Delhi ISO:7202 |
| Composition
: |
Manufactured
on a basis of mixture of Ammonium Phosphates and Ammonium
Sulphates. Flow promotive and moisture repellent additives on
a Silicone basis results best formulations. |
| Application
: |
Suitable
for extinguishing smouldering fires (wood, textiles, rubber tyres,
etc.), Flammable liquids (Petroleum, gasoline, Oil etc.),
gases burning
under
pressure (methane, propane, domestic gas) for fire in dry
electrical
installations and also for fires in light metals. |
| Suitability
For Extinguishing Equipment
: |
It
is suitable for hand operated fire extinguishers of all types, as
well as for
mobile
extinguishers and fixed installations. Dry propelling agents such
as compressed air, nitrogen,
carbon dioxide can be used. |
| Storage
: |
Powder
can be stored safely Without affecting its efficiency for at least
five
years if kept in our original packages. |
| Packing
: |
A.
5 Kg, 10 Kg, 50 Kg in Polyethylene lined HDPE bags.
B. Plastic/Fibre drums with inner Polyethylene bags of 50 Kg. Other type of packaging upon request. |
| Physiological
Properties
: |
No
toxicity under normal conditions of handling and use. It is non
- corrosive and non -
abrasive. |
| Foam
Compatibility
: |
Modern
fire fighting utilises different foam types and dry powders.
Generally foam and dry chemicals
are not compatible. But only "QUALITY" powders
are
foam compatible. and do not affect foams. |
| Sealing
: |
Hermetically
sealed with pilfer proof seals serially numbered. |
|
|
TECHNICAL
SPECIFICATION
:-
Technically our product meets the requirements of
:-
•
Indian Standard IS: 14609 International Standard ISO:7202
•
U.S. Federal Specification OD 1308 A 0 British Standard BS:6535 Part
3
•
European Standard EN 615 & EN3 0 Underwriters Lab UL 711
Typical
Properties :-
| Appearance |
Yellow |
| Chemical
Contents of MAP NH4 H2P04 (% Min) |
90 |
| Apparent
Density (gm/ml) |
0.75
- 1.18 |
| Packed
Density (gm/ml)
|
1.00
- 1.17 |
| Flowability
(gms/Sec)
|
60
- 110 |
| Average
Particle Size (Microns)
|
5
- 10 |
|
Particle
Size Distribution (%)
40 Mesh 425 Micr
100
Mesh 149 Micr
200
Mesh 74 Micr
325
Mesh 44 Micr Pan
|
0
0
- 10
10 - 25
15 - 25
50 - 70
|
| Specific
Surface (cm2/gm) |
3000
- 4500 |
| Hygroscopicity (% Gain in Wt Max. )
|
1.5 |
| Moisture
(%Gain in Wt.Max)
|
0.15 |
| Water
Repellency ( % Gain in Wt. Max )
|
0.50 |
| Discharge
Performance (% Min)
|
90 |
Caking
& Lumping Penetration Value
(mm Min)
|
16 |
| Temperature
Stability (°C)
|
-
55 to + 85 |
| Fusing
Point (°C)
|
250 |
| Electrical
Conductivity
(Volt Max) |
1000 |
| Fire
Test (gm Max) IS/Us
|
20/2 |
| Efficiency
/ Ratings 1 Kg Extng. |
13
A 34 B |
|
2 Kg Extng. |
21
A 55 B |
|
5 Kg Extng. |
34
A 183 B |
|
10 Kg Extng. |
55
A 296 B |
*
Specification are subject to modifications for the purpose of
technical
improvements. |
|
