
The inline balance pressure foam proportioners are used with positive displacement foam concentrate supply pump . The system controls accurately the flow of foam concentrate into the water stream over a wide range of flow rate and pressure.
The Inline Balance Pressure Foam Proportioning System is used for simultaneous operation of the multiple foam injection even with different pressures between the two injection point with a single concentrate supply line. Various sizes of inline balance pressure proportioner can be combined to suit the flow requirement of each hazard area.
Inline balance pressure proportioning system utilizes a single, positive displacement foam concentrate supply pump, an atmospheric foam concentrate storage tank, inline balance proportioner, and a foam concentrate regulating valve. The pressure regulating valve is mounted on foam concentrate return line to the foam concentrate storage tank. The valve regulates the foam concentrate supply pressure.
The Inline balance pressure proportioner consists of a ratio controller, diaphragm operated pressure balancing valve, water and foam gauges, and pressure sensing hose of teflon tube with stainless steel braided cover, interconnecting trim fittings with various control and flush valves. The water inlet pressure and foam concentrate pressure at metering orifice is sensed by a diaphragm valve and it automatically balances the concentrate supply to provide accurately proportioned water foam solution over a wide range of flow conditions. A foam concentrate supply valve is also provided as an optional item. The system requires foam concentrate supply pressure of 1.5- 2.0 bar. higher than the water supply pressure. The Inline balance pressure proportioner is also provided with a manual balancing valve.
TECHNICAL DATA | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
MODEL | IB for Bronze construction IS 318 / ASTM B62 IBS for stainless steel ( 304 ) construction ( ASTM A351-CF8 ) | ||||||||||
SIZE | 80, 100, 150 & 200 NB | ||||||||||
MAXIMUM SERVICE PRESSURE | 14 BAR ( 200 PSI ) | ||||||||||
MIMIMUM WORKING PRESSURE | 3.0 BAR. ( 44 PSI ) | ||||||||||
FLOW RANGE |
|
||||||||||
FLANGE CONNECTION | ANSI B16.24 Class 150# for bronze ANSI B16.5 Class 150# for stainless steel | ||||||||||
THREADED OPENING | BSPT/NPT optional | ||||||||||
PRESSURE SENSING HOSE/td> | TEFLON tube with stainless steel braided cover | ||||||||||
TRIM CONNECTION AND VARIOUS CONTROL VALVES | Brass/stainless steel | ||||||||||
FACTORY HYDROSTATIC TEST PRESSURE | 25 Bar. ( 365 PSI) | ||||||||||
FINISH | Epoxy red painted. | ||||||||||
ORDERING INFORMATION | Please specify :
|